cannibol_90
Member level 5
- Joined
- Jun 20, 2009
- Messages
- 83
- Helped
- 5
- Reputation
- 10
- Reaction score
- 5
- Trophy points
- 1,288
- Activity points
- 2,066
Hi,
I am trying to use DGS and DMS to design elliptic filters on micro-strip line. But, it is giving a lot of problems like mutual coupling between two DGS, the impedance and S-parameter characteristics change when DGS is shifted on a microstrip line et al.. This is not enabling me to make a proper design of the filter needed. Also is there any proper design procedure for a DGS loaded Low-Pass filter. If so please let me know, as DGS from what i have learnt and simulated till now is an arbitrary structure. A proper design approach is not available anywhere. Any help would be greatly appreciated.
Thank You!:smile:
I am trying to use DGS and DMS to design elliptic filters on micro-strip line. But, it is giving a lot of problems like mutual coupling between two DGS, the impedance and S-parameter characteristics change when DGS is shifted on a microstrip line et al.. This is not enabling me to make a proper design of the filter needed. Also is there any proper design procedure for a DGS loaded Low-Pass filter. If so please let me know, as DGS from what i have learnt and simulated till now is an arbitrary structure. A proper design approach is not available anywhere. Any help would be greatly appreciated.
Thank You!:smile: