Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Ferrites - question about inductance

Status
Not open for further replies.

j_writer

Junior Member level 1
Junior Member level 1
Joined
Jan 2, 2010
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
California
Activity points
1,444
(Please see post #376043 for background info. Thanks.)

1) How do you measure main inductance of a transformer? Secondary open or loaded or does it make a difference?

2) How does this relate to specific inductance AL? Should L = AL*(N squared)?
 

1. If you look at a transformer equivalent circuit, you'll see that open circuit measurement should give the smallest
error in main inductance measurement.
2. Yes.
 

AL is the "ALlowance".....it is the inverse of "reluctance"

although i think its been adjusted and your equation gives inductance in nH.
 

I know this parameter is very important but I cannot find a good definition on the web. Most often it is written A-sub-L. Further questions...

3) What is meant by a summation of area over inductance? (∑ A/l)
4) Are the units of A-sub-L equal to Henrys over turns squared? (If so, this would account for the name specific inductance which I have seen in some papers.)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top