pakkiboy
Member level 1
- Joined
- Aug 4, 2013
- Messages
- 32
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 6
- Location
- Jeddah, Saudi Arabia, Saudi Arabia
- Activity points
- 222
Dear members, I have designed full bridge rectifier for pure sine wave inverter using microcontroller and IR2110. I have given 12 V to ir2110 . in start i give 12 V DC to drain of mosfet , worked well with good sine wave , then i have increased voltage to 30 V and then to 60 V , everything fine ( good output sine wave ). Then i have tried to give 300 V DC to drain of mosfet. but mine circuit blown
Mosfet : irf 3205
Driver ic : ir2110
capacitor : 33 UF and then also of higher values .
Can anyone plz plz help me
Circuit
https://obrazki.elektroda.pl/4660519100_1379535325.png
Mosfet : irf 3205
Driver ic : ir2110
capacitor : 33 UF and then also of higher values .
Can anyone plz plz help me
Circuit
https://obrazki.elektroda.pl/4660519100_1379535325.png