pakkiboy
Member level 1
- Joined
- Aug 4, 2013
- Messages
- 32
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 6
- Location
- Jeddah, Saudi Arabia, Saudi Arabia
- Activity points
- 222
Dear members , I have designed Pure sine wave inverter
Input = 12 v DC
Output = 320 v DC , 220 v AC
Transformer = 400 W Ferrite core transformer .
In 1st stage I have used push pull topology to convert 12 v to 320 and in second i have used Microcontroller pic16f684 , IR2110 , And mosfet to convert 320 DC to AC.
mine main issue that circuit work well at no load condition but voltage drop at load (to about 265-270 V DC ) . I have used feedback of SG3525 but after all still voltage drop. Any idea how to maintain voltage constant . PLZ PLZ help
Regards
Qamar
Circuits attached
Input = 12 v DC
Output = 320 v DC , 220 v AC
Transformer = 400 W Ferrite core transformer .
In 1st stage I have used push pull topology to convert 12 v to 320 and in second i have used Microcontroller pic16f684 , IR2110 , And mosfet to convert 320 DC to AC.
mine main issue that circuit work well at no load condition but voltage drop at load (to about 265-270 V DC ) . I have used feedback of SG3525 but after all still voltage drop. Any idea how to maintain voltage constant . PLZ PLZ help
Regards
Qamar
Circuits attached