FCB/FCC LCD cable connector - can't find one

Status
Not open for further replies.
B

burkley

Newbie level 2
Joined
Jul 27, 2005
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,302
Hi,

I'm working on a project that will utilize an LCD which I have already been provided with. The LCD uses a connector that has 1.2mm pitch. I cannot find a connector that will fit this so that I can attach it to my prototype board. I have found a link to an adapter product

https://www.ramtex.dk/fccfcb/fccfcb.htm

and the description specifically mentions FCB/FCC cables. But I cannot find any references to this or FCC/FCB SMD connectors anywhere else. I would like to find a US source for a connector, any ideas? Thanks,

-Joe
 

maybe here?:
http://www.molex.com/cgi-bin/bv/molex/home_init.jsp?BV_SessionID=@@@@1056985722.1122493080@@@@&BV_EngineID=ccceaddffejkgkecflgcehedffgdfmk.0&channel=Products&familyOID=-8352&frellink=Introduction&chanName=family&pageTitle=FFC-FPC+(SMT)+%7c+Overview&mCnt=/family/intro.jsp&oid=-8352
 

Thanks, that link helped a little. The search term was FCC and FPC, you'll notice that in my original post the term was FCB so perhaps there was a typo in the website I originally quoted.

I searched at the site suggested, also mouser.com and digikey using flat flexible cables. There are numerous products, but the closest pitch is always 1.25mm, not the 1.2mm I seem to need. Very frustrating...

-Joe
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…