FCB/FCC LCD cable connector - can't find one

[burkley]

Hi,

I'm working on a project that will utilize an LCD which I have already been provided with. The LCD uses a connector that has 1.2mm pitch. I cannot find a connector that will fit this so that I can attach it to my prototype board. I have found a link to an adapter product

https://www.ramtex.dk/fccfcb/fccfcb.htm

and the description specifically mentions FCB/FCC cables. But I cannot find any references to this or FCC/FCB SMD connectors anywhere else. I would like to find a US source for a connector, any ideas? Thanks,

-Joe

 

[skydiverc]

maybe here?:
http://www.molex.com/cgi-bin/bv/molex/home_init.jsp?BV_SessionID=@@@@1056985722.1122493080@@@@&BV_EngineID=ccceaddffejkgkecflgcehedffgdfmk.0&channel=Products&familyOID=-8352&frellink=Introduction&chanName=family&pageTitle=FFC-FPC+(SMT)+%7c+Overview&mCnt=/family/intro.jsp&oid=-8352

 

[burkley]

Thanks, that link helped a little. The search term was FCC and FPC, you'll notice that in my original post the term was FCB so perhaps there was a typo in the website I originally quoted.

I searched at the site suggested, also mouser.com and digikey using flat flexible cables. There are numerous products, but the closest pitch is always 1.25mm, not the 1.2mm I seem to need. Very frustrating...

-Joe