Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

failure condition of dc-dc converter

Status
Not open for further replies.
K

krishnavv

Newbie level 4
Newbie level 4
Joined
Feb 25, 2011
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,308
hai..
am using dc-dc converter(AHF2815T)from advanced analog.This is malfunctioning like at +15v output this shows the 34v,at -15v 0.7v and at 5v 5v showing..what is the reason for malfunctioning?
plz tell me the reason..
 

There is no useful information here. The +/-15 pair being jacked as
you describe, may mean you haven't got the ground for that section
commoned with the 5V ground (which evidently is the measurement
reference, since that at least is right).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top