vivekitbhu2001
Newbie
![Newbie level 1](/styles/images/ranks/alevel1.gif)
hi,
i have bought this sim300 mms module which comes with mms command set.
i am using vodafone network in UK, i can send sms through the module but when i try to send MMS
sometimes it fails and few times it sends OK reply but i never recieve it, i am not sure whats going on.
vodafone settings:
Access Point Name: wap.vodafone.co.uk
Username: wap
Password: wap
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 212.183.137.12
Session mode: Permanent
Port number: 8799
MMS Message (Relay) Server URL: **broken link removed**
i am trying in this order
R: call ready ( power up)
at+cgatt?
+cgatt=1
at+cmmscurl=""mms.vodafone.co.uk/servlets/mms/" ( vodafone mms setting got it from the web).
at+cmmsnetcfg=1,"pp.vodafone.co.uk"
at+cmmsproto=1,"212.183.137.012",8799
at+cmmsrecp="phonenumber"
at+cmmsedit=1
at+cmmsdown="text",5,5000
connect
12345
ok
at+cmmsview ( i can see the text i just send ...12345)
when i send
at+cmmsend
it says ok...
{
at+cmmsproto=1,"212.183.137.012",8799
OK
at+cmmssend
OK
}
i am sorry if this is discussed earlier, i have browsed lot of threads but till now have failed to get success.
i would really appreciate help in this regard.
i have bought this sim300 mms module which comes with mms command set.
i am using vodafone network in UK, i can send sms through the module but when i try to send MMS
sometimes it fails and few times it sends OK reply but i never recieve it, i am not sure whats going on.
vodafone settings:
Access Point Name: wap.vodafone.co.uk
Username: wap
Password: wap
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 212.183.137.12
Session mode: Permanent
Port number: 8799
MMS Message (Relay) Server URL: **broken link removed**
i am trying in this order
R: call ready ( power up)
at+cgatt?
+cgatt=1
at+cmmscurl=""mms.vodafone.co.uk/servlets/mms/" ( vodafone mms setting got it from the web).
at+cmmsnetcfg=1,"pp.vodafone.co.uk"
at+cmmsproto=1,"212.183.137.012",8799
at+cmmsrecp="phonenumber"
at+cmmsedit=1
at+cmmsdown="text",5,5000
connect
12345
ok
at+cmmsview ( i can see the text i just send ...12345)
when i send
at+cmmsend
it says ok...
{
at+cmmsproto=1,"212.183.137.012",8799
OK
at+cmmssend
OK
}
i am sorry if this is discussed earlier, i have browsed lot of threads but till now have failed to get success.
i would really appreciate help in this regard.