Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Reply to thread

Message

I am currently working on detecting NB-IoT signals using the USRP B210. After converting this signal to baseband and obtaining the digital IQ data via the ADC, I need to save the IQ data as a file. This file will then be used as digital input for the Virtex-7 FPGA to decode the data. I am using GNU Radio for this project. Could you please guide me on how to axtract and save the IQ data as a file after converting the signal to baseband?

[QUOTE="PhdSA, post: 1790243, member: 685747"] I am currently working on detecting NB-IoT signals using the USRP B210. After converting this signal to baseband and obtaining the digital IQ data via the ADC, I need to save the IQ data as a file. This file will then be used as digital input for the Virtex-7 FPGA to decode the data. I am using GNU Radio for this project. Could you please guide me on how to axtract and save the IQ data as a file after converting the signal to baseband? [/QUOTE]

Verification

Welcome to EDAboard.com

Reply to thread

Part and Inventory Search

Connect with us

Online statistics

Forum statistics