Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Reply to thread

Message

Hi,

I designed a circuit to extend the range of the TL431 programmable voltage reference IC.

[ATTACH=full]198504[/ATTACH]

The IC is rated at 36V (cathode to anode maximum voltage) and its reference voltage is 2.5V.

Do you see any flaws in the circuit above?

[QUOTE="riscv, post: 1790800, member: 695355"] Hi, I designed a circuit to extend the range of the TL431 programmable voltage reference IC. [ATTACH type="full"]198504[/ATTACH] The IC is rated at 36V (cathode to anode maximum voltage) and its reference voltage is 2.5V. Do you see any flaws in the circuit above? [/QUOTE]

Verification

Welcome to EDAboard.com

Reply to thread

Part and Inventory Search

Connect with us

Online statistics

Forum statistics