Export PCB design from Altium to CST Microwave Studio

Status
Not open for further replies.
S

Sherry1

Member level 3
Joined
Apr 4, 2013
Messages
61
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Manchester, UK
Visit site
Activity points
1,810
I have designed a PCB for ceramic chip antenna test ( its a copper pour ground plane with an SMA port connection and solder pins for placing chip antenna on it).
I wanted to simulate its effect on the radiation pattern of antenna in CST Microwave Studio. I have made a model of chip antenna in CST MWS but.... Is there a way that I can export this PCB design ( made in Altium Protel) to CST Microwave studio and simulate it? SO that I dont have to draw the ground plane all over again?

The PCB design is attached
 

What file formats are available for export from Protel? .SAT would work if it's available.
 

.SAT is not, there is .DXF but that is 2D :-(
Here are the import/ export format both the software accept.
**broken link removed**

and for CST https://www.cst.com/Content/Products/MWS/ImpExp.aspx , The description of CST PCB Studio does say that it accepts Altium files but my educational license does not permit access to PCB studio , my program crashes !

Please help
 

try the .stp or step format. looks like it's on the export list for altium and on the import list for cst.
 
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…