susmimu
Junior Member level 3
- Joined
- Sep 5, 2012
- Messages
- 30
- Helped
- 2
- Reputation
- 4
- Reaction score
- 2
- Trophy points
- 1,288
- Location
- Dhaka, Bangladesh
- Activity points
- 1,461
Dear Sir,
I have developed a home automation project using both IR and RF remote control which is used to:
1. ON/OFF room lights and fans
2. Speed control for fans
Now I want to do the works remotely over internet.
I already made the hardware (Ethernet module using ENC28j60) without firmware. Now I need the firmware for Ethernet module. Could anybody help me by giving the firmware in C language.
Please give full code if anyone did such project, or full code for Ethernet module.
Regards
Hasan
I have developed a home automation project using both IR and RF remote control which is used to:
1. ON/OFF room lights and fans
2. Speed control for fans
Now I want to do the works remotely over internet.
I already made the hardware (Ethernet module using ENC28j60) without firmware. Now I need the firmware for Ethernet module. Could anybody help me by giving the firmware in C language.
Please give full code if anyone did such project, or full code for Ethernet module.
Regards
Hasan