ESR of ceramic capacitor. How to read the resistance-frequency graph?

Status
Not open for further replies.

ridgemao1983

Junior Member level 1
Joined
Dec 3, 2009
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,445
This graph is from murata's capacitor selection tool.

The lowest impedance is 0.003Ohm at 0.9Mhz.
The lowest resistance is 0.002Ohm at 0.2Mhz.

I think I should use the impedance-frequency graph, so the ESR of the capacitor is 0.003Ohm and the resonant frequency is 0.9Mhz.

But what is the meaning of the resistance-frequency graph? If the "resistance" means the real part of the impedance, the resistance shouldn't vary with the frequency.

Both Mutara and TDK capacitors have the graph for resistance-frequencies and impedance-frequencies, what is the meaning of this "resistance"?
 

Attachments

  • chart.png
    28.5 KB · Views: 127
Last edited:

If the "resistance" means the real part of the impedance, the resistance shouldn't vary with the frequency.
Only in a over-simplified first order model. If you consider ESR as the real impedance part of a series equivalent circuit, it will be of course frequency dependend:
- because it also represents dielectric losses. By nature of the measurement, they can't be distinuished from true series resistance.
- because series resistance is frequency dependend itself, due to skin effect and proximity effect.
 

The capacitor will resonate with its lead inductance to give a true minimum impedance, at higher frequencies the increasing impedance of the inductance of the leads will lead to a rise in impedance, which will be inductive.
Frank
See forum post by Genomerics wrt ESR of caps
 
Last edited:

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…