Error generating netlist when importing momentum component into schematic

bcaparna · May 17, 2017

Hello,

After running the momentum simulation and creating and updating the symbol, I placed the symbol from the library in a schematic file. After attaching the passive and active component s-parameter files to the simulated ports, when I try to run the s-parameter simulation, I encounter the following error:

"(stdcmds.ael line 261, column 5)
Error generating netlist for "ATF52189_1350_1850_lib:ZX-60_MOM_SIM:schematic": Failed to create netlist:
In design `ATF52189_1350_1850_lib:ZX-60_MOM_SIM:schematic':
The instance `I__0' has 17 pins, but the view `ATF52189_1350_1850_lib:try_1:schematic' has 0 pins".

Can someone explain the meaning of this error?

Thanks !

volker@muehlhaus · May 17, 2017

Have you created symbol and emModel?
The emModel is required to store/manage the Momentum simulation results.

anilkrpandey · May 18, 2017

Also, double check which view of EM component are you using in schematic simulation, ideally it should be emModel

Error generating netlist when importing momentum component into schematic

bcaparna

Newbie level 1

volker@muehlhaus

Advanced Member level 6

anilkrpandey

Member level 5

Similar threads

Error generating netlist when importing momentum component into schematic

bcaparna

Newbie level 1

volker@muehlhaus

Advanced Member level 6

anilkrpandey

Member level 5

Similar threads

Privacy & Transparency

Privacy & Transparency