Nitish12
Newbie
While adding a new subcircuit element from a netlist in AWR, I am getting an Add Subcircuit Error message that the element has no ports.
In first screenshot that I have attached, BFG520W 1 is the APLAC netlist from which there is a subcircuit BFG520W 1 element, which upon adding in AWR I am getting the error message which is shown in the second screenshot that I have attached.
In first screenshot that I have attached, BFG520W 1 is the APLAC netlist from which there is a subcircuit BFG520W 1 element, which upon adding in AWR I am getting the error message which is shown in the second screenshot that I have attached.