Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Error coming in AWR Software

N

Nitish12

Newbie
Newbie level 1
Joined
Sep 30, 2024
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
While adding a new subcircuit element from a netlist in AWR, I am getting an Add Subcircuit Error message that the element has no ports.

In first screenshot that I have attached, BFG520W 1 is the APLAC netlist from which there is a subcircuit BFG520W 1 element, which upon adding in AWR I am getting the error message which is shown in the second screenshot that I have attached.

Screenshot (32).png

Screenshot (33).png
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top