In my design there is a Xilinx Virtex II FPGA and a XCF16p platform flash in the JTAG chain.
I can program the FPGA, but I can't burn the Flash with Impact 7.1.
I have tried sp1, sp2, sp3 for 7.1, but the problem persists.
Finally, I managed to program the Flash with 6.2sp3....
Has anyone experienced similar problems with Impact 7.1 ?
I can program an XCF01 with Impact 7.1 sp3 with no problem.
But I could believe that there is some sw error in the Impact, maybe you'd better wait for the next service pack. :|