Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
hi,
somewhere (it was more than year ago)
i got this
*************
power up the phone with +5V applied to test input
phone will respond with "U" at 9600 bps
send "0B" within 1 second (else phone turns on)
phone will respond with "R"
send two bytes 00 03
phone will respond with two bytes 00 02
send 64 bytes 00
phone will respond with three bytes
send another 64 bytes 00
phone will send "S" after about half a second
send the binary file to the phone
*************
here is also a binary uploader with src from that site (i've lost the link :-(
i never use them....
hope this helps
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.