Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

EPSON printer programming

Status
Not open for further replies.
T

techie

Advanced Member level 3
Advanced Member level 3
Joined
Feb 5, 2002
Messages
839
Helped
58
Reputation
116
Reaction score
9
Trophy points
1,298
Location
Pakistan
Activity points
7,805
printer programming

Can someone point to the programming guide (manual) of a standard EPSON 9-pin dot matrix printer. I want to attach it to a microcontroller and use it to print in graphics mode.

Any other information / link on this subject will also be highly appreciated.
 

epson printer programmer

Some of the Epson Dotmatrix Printer manuals can be downloaded here:

**broken link removed**

Also look at this:

**broken link removed**

best regards
 

epson printer programing

I have the PCL for HPlaserJet 6P/6MP.
Could i use this for the Epson 80 column dot matrix interfacing using
the microcontroller ?
Could i get the necessary pin connection details with that of
the 8051?

regards,
karthik bala guru.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top