aceyhan
Newbie level 5
- Joined
- Jun 22, 2010
- Messages
- 10
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,358
I am using Encounter RTL Compiler Version 10.1.
I am getting the following warning message as a result of using the command (report ple). This warning message is about the tool dropping certain metal levels and it looks like the following:
** = 'M1' is dropped because its Resistance/Length (value_of_resistance_here) is too large (threshold is 50).
I would like to find out how to change this threshold so that the values that I enter in my LEF file are not changed with the threshold value which is somehow set to 50. I went over the command reference and attribute reference manuals, but could not find out how to solve this issue yet.
Any help is appreciated.
Thanks!
I am getting the following warning message as a result of using the command (report ple). This warning message is about the tool dropping certain metal levels and it looks like the following:
** = 'M1' is dropped because its Resistance/Length (value_of_resistance_here) is too large (threshold is 50).
I would like to find out how to change this threshold so that the values that I enter in my LEF file are not changed with the threshold value which is somehow set to 50. I went over the command reference and attribute reference manuals, but could not find out how to solve this issue yet.
Any help is appreciated.
Thanks!