EMI filter

Status
Not open for further replies.
R

Rajinder1268

Full Member level 3
Joined
Mar 20, 2021
Messages
162
Helped
1
Reputation
2
Reaction score
4
Trophy points
18
Visit site
Activity points
1,228
Hi,
I need some help in designing a EMI filter for a buck regulator, used in automotive application, power from car battery, I have a fuse and reverse voltage protection.
I am using a TI LM53600 device. The datasheet has ESD ratings of 2kV HMB.
Is there a simple pi filter solution to eliminate high frequency noise?
Thanks in advance
 

Sort by date Sort by votes
Hi,

You headline talks about EMI. Which is "sending out" HF.

Fuse, reverse protection, ESD ... has nothing to do with EMI.

EMI:
There is wired and radiated HF noise. Both need different solutions.
But besides schematic, the PCB layout has amost identical impact on EMI.
Thus we need to see both, schematic and PCB laoyut to give good assistance.

A well designed PCB maybe needs no additional filters.
For a badly designed PCB it´s huge effort and a lot of trial and error to get good EMI values.

Klaus
 

Upvote 0 Downvote
Hi
I have done a schematic but not PCB layout. I wanted to find a pi filter solution or similar to add to the schematic so it covers the EMI issues. I have seen one fit components that do both EMI and transients. Would those be ok to use?
--- Updated ---

Hi,
Thanks. Are there good design guidelines to avoid the EMI filter and rely on good PCB layout?
 
Last edited:

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…