engineer1000
Advanced Member level 4
- Joined
- Aug 16, 2012
- Messages
- 106
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,296
- Activity points
- 2,060
]I have a cleaning machine that I have converted to run at 120V 60hz. The mains filter I am using is 230V 50/60hz 5A.
I am using it to run 120V AT 6.5A. After running the m/c for most of the day the filter is still cold so I don't thing that I am putting too much power through it.
My question is can I stick with this filter or should I use a 10A filter?
I am using it to run 120V AT 6.5A. After running the m/c for most of the day the filter is still cold so I don't thing that I am putting too much power through it.
My question is can I stick with this filter or should I use a 10A filter?