armboard
Newbie level 2
The SBC6300X supports extended temperature operation, and comes pre-loded with a Linux 2.6-based kernel, YAFFS filesystem, and Wince6.0 BSP.
The SBC6300X uses Atmel's interesting AT91SAM9263 ,The AT91SAM9263 microcontroller-based system-on-chip embeds a 200 MIPS ARM926EJ-S-based processor.
The AT91SAM9263 employs 27 DMA channels including Atmel's 20-channel peripheral DMA controller (PDC), a 9-layer bus matrix, and two additional busses
for data- and instruction-tightly-coupled-memories (TCMs) to boost CPU performance and provide on-chip data transfer rates of up to 41.6 Gbps.
Two external bus interfaces (EBIs) support gigabyte-plus external memories.Its extensive peripheral set includes LCD Controller, an USB Device and an USB OHCI Host Controller, an Image Sensor Interface, a 2D Graphic accelerator, an Ethernet, MCI, AC97, PWM controllers.
The arm development board operates from -10 to 70 degrees Celsius (without backup battery), though individual components are claimed to be "industrial grade" parts good between -40 and 85 degrees Celsius.
products can be found here.
**broken link removed**
**broken link removed**
**broken link removed**
Embest Info&Tech Co., LTD. (China HQ)
Room 509, Luohu Science Building
#85 Taining Rd., Shenzhen, Guangdong
China 518020
Tel: 0086-755-25635656, 25636285
Fax: 0086-755-25616057
Sales Email: market@embedinfo.com or embest1sale1@yahoo.com
Support Email: support@embedinfo.com or EmbestEmbest@yahoo.com
**broken link removed**
The SBC6300X uses Atmel's interesting AT91SAM9263 ,The AT91SAM9263 microcontroller-based system-on-chip embeds a 200 MIPS ARM926EJ-S-based processor.
The AT91SAM9263 employs 27 DMA channels including Atmel's 20-channel peripheral DMA controller (PDC), a 9-layer bus matrix, and two additional busses
for data- and instruction-tightly-coupled-memories (TCMs) to boost CPU performance and provide on-chip data transfer rates of up to 41.6 Gbps.
Two external bus interfaces (EBIs) support gigabyte-plus external memories.Its extensive peripheral set includes LCD Controller, an USB Device and an USB OHCI Host Controller, an Image Sensor Interface, a 2D Graphic accelerator, an Ethernet, MCI, AC97, PWM controllers.
The arm development board operates from -10 to 70 degrees Celsius (without backup battery), though individual components are claimed to be "industrial grade" parts good between -40 and 85 degrees Celsius.
products can be found here.
**broken link removed**
**broken link removed**
**broken link removed**
Embest Info&Tech Co., LTD. (China HQ)
Room 509, Luohu Science Building
#85 Taining Rd., Shenzhen, Guangdong
China 518020
Tel: 0086-755-25635656, 25636285
Fax: 0086-755-25616057
Sales Email: market@embedinfo.com or embest1sale1@yahoo.com
Support Email: support@embedinfo.com or EmbestEmbest@yahoo.com
**broken link removed**