Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Embedded tcp/ip through PSTN

Status
Not open for further replies.

gcolsani

Newbie level 6
Newbie level 6
Joined
Jan 10, 2003
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Córdoba - Argentina
Activity points
117
Embedded tcp/ip

I need to get information about bulding a tcp/ip net with embedded controllers through PSTN. I have the IP modem but I do not know how to do the data exchange protocol in it.
Is there any standard solution? (better than simple FTP and SMTP)
Thanks for information.
 

Please check the sample www.keil.com

Maybe the example will be in ST166 part.

Please check....
 

maybe information at w*w*w.*rabbitsemiconductor.com may be helpful... maybe still the web kit of www.atmel.com
 
Last edited by a moderator:

I'm studying this solution too.

in my idea...

The microcontroller connect to modem by serial (RS232) to control the modem
for dial to ISP., then connected to internet.
(We known as "dial-up networking" in Windows)

thus, this must be use PPP or SLIP.

There are many ebook in this forum.

**broken link removed**

**broken link removed**

Regards,
ZeRoN
 

Serial line Internet protocol - sources for 8 bit MCU

It can be useful.

pin
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top