Electro Static Discharge Type Air Purifier or Ionizer

Status
Not open for further replies.
C

Code Warrior

Full Member level 4
Joined
Dec 30, 2004
Messages
230
Helped
10
Reputation
20
Reaction score
2
Trophy points
1,298
Activity points
1,831
Hi,

I want to make Electro Static Discharge type air purifier or ionizer for collage student.
Can any one tell me which parts are required for this. Any link for the same. And what are the requirement for the same.

Bye
 

Hi,

I want to make Electro Static Discharge type air purifier or ionizer for collage student.
Can any one tell me which parts are required for this. Any link for the same. And what are the requirement for the same.

Bye
Click to expand...
Hi Code Warrior
It is not complicated ! the only thing that you need is a high voltage delivering circuit . it means a circuit which can increase the voltage . most of the ionizers which are designing for air systems are working with the voltages between 3 KV will 50 KV . but be careful about them , these voltages are so dangerous .
Notice these systems can be cause of creating unwanted O3 gas which can be harmful for people which have some breathing problems .
Best Wishes
Goldsmith
 

Hi goldsmith,
Can you please give me some link for Electro Static Discharge based air purifier. I saw one type which uses high voltage. Saw circuits which multiply to KV, is this a ESD based ionizer? Am confused. Please provide me some links for ESD based ionizer.

Thanks goldsmith.
 

Hi Code Warrior

Certainly . here some good links which are dealing with ionizers are coming :

**broken link removed**
**broken link removed**
**broken link removed**

There are many ways to make such high voltages . for instance using a tuned oscillator and a battery and then it will increase the voltage till 100 volts or higher , perhaps , and then a cockcroft- walton circuit .
Best Wishes
Goldsmith
 

Hi,
It means, we have to generate high DC voltage using capacitor diode or use EHT. Should I use EHT? What is your opinion?
 

It means, we have to generate high DC voltage using capacitor diode or use EHT. Should I use EHT? What is your opinion?
Click to expand...
Hi again
No it is not generation ! it means you have to convert your voltage to an HVDC !
For my opinion you can easily build that circuit because that is only resistors and capacitors and diodes . that's all .

Best Wishes
Goldsmith
 

Hi,

But can I use EHT instead of diode and capacitors? I presume if voltage is very high ionization will take place rapidly. What you think. Can you suggest in this regard.
Thanks goldsmith.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…