Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Edit_GND_plane_shape_Altium

Status
Not open for further replies.
O

omdatov

Newbie level 4
Newbie level 4
Joined
Nov 1, 2013
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
44
Hello,

I'm working with Altium Designer 10. In my PCB stackup I added a GND plane. I would like to edit the shape of this GND plane but I didn't found any option in Altium to help me make this, whereas, I could make this easly when I use a polygon plane? Does someone manage to edit the shape of a GND plane with AD10?

Regards,
 

you can draw thick line in GND plane(above 20mil) and can split the plane,I think there is no edit option in GND and PWR plane.
 

Thank you for your reply. So it seems that there is not an option to edit the GND plane...Could you tell me what's the role of the pullback (The green line in the the PCB edges) when I add a GND palne? I managed to romove a zone from the GND plane but the green line still exist? Does it a copper zone or no?
 

refer this link,your doubt may clear

**broken link removed**
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top