Dvi controller for virtex 5 xupv5 lx110t

Status
Not open for further replies.

Shriharsha

Newbie level 4
Joined
Mar 8, 2014
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
37
Hai

i am working with virtex 5 xupv5 lx110t board. I am trying to output an image on to a monitor using vga. But there is no vga_out in the board so i have to use dvi.

I dont know how to design it. Does it works same as vga (principle). Can somebody suggest me some tutorials or documents. .

- - - Updated - - -

TELL ME WHAT ARE THE THINGS I HAVE TO TAKE CARE IF M DESIGNING A DVI CONTROLLER?
 

Hi

As far as I can see, the board you mentioned is recognized by Xilinx webpage as ML505 dev platform. If this information is correct, you have a Chrontel CH7301C DVI controller on-board. You should download manuals of these and read them.

The DVI connector on board is DVI-I type which means you have an digital and analog output (so the DVI->VGA converter could work properly). If you want to drive vga monitor, you should send signals to Chrontel controller mentioned above; a glance at the datasheet shows that this controller produces both digital and analog signals.

Regards,
 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…