beetro78
Member level 3
- Joined
- Jan 17, 2007
- Messages
- 59
- Helped
- 3
- Reputation
- 6
- Reaction score
- 0
- Trophy points
- 1,286
- Location
- Naples, Italy
- Activity points
- 1,774
I need to model a finite ground CPW.
The structure is very small if compared to the wavelength and also with respect to the dimensions of the substrate so I used dummy model objects above the trasmission line and below in the substrate.
Is this the rigth way? Or there is a more elegant way to get a very tight mesh in the CPW gap regions and a looser one in the rest of the box?
Can someone share his/her experinece in CPW/CPS sw simultations?
Thanks
The structure is very small if compared to the wavelength and also with respect to the dimensions of the substrate so I used dummy model objects above the trasmission line and below in the substrate.
Is this the rigth way? Or there is a more elegant way to get a very tight mesh in the CPW gap regions and a looser one in the rest of the box?
Can someone share his/her experinece in CPW/CPS sw simultations?
Thanks