Dual voltage supply problem

Status
Not open for further replies.
A

aurelien_7

Newbie level 5
Joined
Mar 15, 2013
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,335
hello!
I have problem with output on this circuit :/
I'm getting -20 volts on negative side while positive side give me 15 volts, so i could use some help to solve it
 

The circuit seems correct to me.
Are you sure the 7915 is connected correctly ? be careful the pinout is different from that of 7815 ! (IN GND OUT is 7815 while GND IN OUT is 7915)
Other possibility, are you sure you didn't reverse the polarity of D6 (in the drawing is correct) ?
 

7915 is connected corretly, i know for the different pinout. And diode is correctly connected, polarity is same as in picture
I tested this configuration on breadboard and it worked :/ maybe it is worng layout on PBC, i will double check it
 

The polarity indicated in the schematic you post is correct. However if the breadbord works and the PCB doesn't, investigate the differences between the two.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…