arul_0317
Newbie level 3
- Joined
- Jul 19, 2012
- Messages
- 4
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,323
Hi everyone,
I'm working with dsPICDEM MCLV board and i'm using MPLAB ICD3 in-circuit debugger as a communication device,
i'm also using mplab ide v8.87 as the software,
and my project is to basically control the Pulsewidth of the square wave that i get when i connect a CRO from M1 to ground, with the POT.
I've attached the codes and can anyone tell me how to do this, thanks.
I can't understand the code as well.
Thanks,
Arul.View attachment Interrupts.txtView attachment Init.txtView attachment SensoredBLDC.txt
I'm working with dsPICDEM MCLV board and i'm using MPLAB ICD3 in-circuit debugger as a communication device,
i'm also using mplab ide v8.87 as the software,
and my project is to basically control the Pulsewidth of the square wave that i get when i connect a CRO from M1 to ground, with the POT.
I've attached the codes and can anyone tell me how to do this, thanks.
I can't understand the code as well.
Thanks,
Arul.View attachment Interrupts.txtView attachment Init.txtView attachment SensoredBLDC.txt