[SOLVED] dsPIC Configuration bits

Status
Not open for further replies.

CoolGuy99

Newbie level 5
Joined
Jul 27, 2023
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
60
Looking for the pdf which explains these config bit
Helping would be appreciated
 

Attachments

  • 2.PNG
    14.4 KB · Views: 189
  • 1.png
    20.6 KB · Views: 138

What are you specifically asking?
Refer to the “dsPIC30F Family Reference Manual” (DS70046) for descriptions of register bit fields
Click to expand...
Section 24. Device Configuration
 
FvM said:
What are you specifically asking?

Section 24. Device Configuration
Click to expand...
Another question:
I've somehow locked the pic 30f2010 mcu . I am able to read and erase the ic but when I click blank check it showing 0×000000 error . Is the ic dead or can I fix it.
Thanks
 

CoolGuy99 said:
Another question:
I've somehow locked the pic 30f2010 mcu . I am able to read and erase the ic but when I click blank check it showing 0×000000 error . Is the ic dead or can I fix it.
Thanks
Click to expand...
its not dead you can erase it with pic kit3 .but you should give supply voltage to pin 27 and 28 . said it your earlier thread
 

As I've mentioned in your other thread, the code protection is set. You need to clear the code protection config bits.
Of course the code protection bit is set for a reason - the original author does not want you to take his work.
Susan
 
thannara123 said:
its not dead you can erase it with pic kit3 .but you should give supply voltage to pin 27 and 28 . said it your earlier thread
Click to expand...
Thanks man it worked perfectly. I had a TOP3000 programmer. I tried with that and supplied 5V with a power supply and it worked.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…