driver circuit for my circuit

Status
Not open for further replies.
G

gosrivats

Newbie level 5
Joined
Jan 21, 2012
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Chennai, Tamil Nadu, India
Visit site
Activity points
1,347
i m currently working on this circuit.in the attachment...i have a problem with driver circuit i m using IR2110 as i have two high side and two low side....first of all i have doubt whether i can use high side and low side driver for this as the pulses are of different...can u guys help me out please
 

It looks like you have 1 low side switch and 3 high side (non grounded) switches. That will take 3 IR2110 chips.
 

It looks like you have 1 low side switch and 3 high side (non grounded) switches. That will take 3 IR2110 chips.
Click to expand...
IR2110 bootstrap supply can't work for S1 and S2 (presumed your driver supply and input signal is referred to VH-). You'll need at least a second floating driver supply voltage. There are additional questions, e.g. does the "mid" voltage node tolerate DC bias currents of the IR2110 driver?
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…