Roudoudou
Newbie level 1
- Joined
- Jun 14, 2007
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Aix-en-provence, France
- Activity points
- 1,287
Hi Folks,
I use the ILI9488 connected to a Cortex M4 on SPI (3-wire) interface and a Cortex A5 on RGB interface. I need to configure the LCD Driver through SPI interface to allow Cortex A5 transferring data through RGB interface.
I found many example on http://en.lcdlcd.com/ website but without any success.
Does anyone have more details about the sequence to apply (by SPI) to configure the LCD in 18-bit RGB Mode ?
Regards
I use the ILI9488 connected to a Cortex M4 on SPI (3-wire) interface and a Cortex A5 on RGB interface. I need to configure the LCD Driver through SPI interface to allow Cortex A5 transferring data through RGB interface.
I found many example on http://en.lcdlcd.com/ website but without any success.
Does anyone have more details about the sequence to apply (by SPI) to configure the LCD in 18-bit RGB Mode ?
Regards