DQS Data strobe enable circuitry

Status
Not open for further replies.
P

promach

Advanced Member level 4
Joined
Feb 22, 2016
Messages
1,201
Helped
2
Reputation
4
Reaction score
5
Trophy points
1,318
Activity points
11,637
For Data strobe enable circuitry , in Figures 4 and 5 , how exactly does the DQS_Clean being phase-shifted 90 degrees with reference to DQS_P and DQS_N ? Why do we need the COUNTER module in which the circuit is described in Figure 5 ? What value should I assign for Vref ?



 

promach said:
how exactly does the DQS_Clean being phase-shifted 90 degrees with reference to DQS_P and DQS_N ?
Click to expand...

Possibly so incoming Data settles at a high or low voltage, just before the moment a clock signal arrives to gate the flip-flop.

What value should I assign for Vref ?
Click to expand...

At the op amps... The other inputs have labels containing P & N. Probably the incoming signals are positive or negative (high vs low). My surmise is that Vref is the voltage which determines the difference between high and low.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…