Kick
Full Member level 6
- Joined
- Sep 27, 2010
- Messages
- 345
- Helped
- 16
- Reputation
- 32
- Reaction score
- 15
- Trophy points
- 1,298
- Location
- India,Bangalore
- Activity points
- 3,178
Hiii guys,
Now I am working on Energy meter project. So in that project I need to measure Voltage and current. Voltage measurement circuit is shown below,what I did is used a step-down transformer(230V to 9V) and secondary of transformer connected to CH1 of microcontroller (PIC18F87J72 CH1 is using for voltage measurement) through a rectifier and voltage divider circuit. Same transformer is using for Power supply,connected to bridge rectifier and regulators. Is it a good idea or should I add one more transformer ?????
Now I am working on Energy meter project. So in that project I need to measure Voltage and current. Voltage measurement circuit is shown below,what I did is used a step-down transformer(230V to 9V) and secondary of transformer connected to CH1 of microcontroller (PIC18F87J72 CH1 is using for voltage measurement) through a rectifier and voltage divider circuit. Same transformer is using for Power supply,connected to bridge rectifier and regulators. Is it a good idea or should I add one more transformer ?????