panthagada.praveen
Newbie level 1
- Joined
- Jul 12, 2011
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,286
1.why status s7 is always 1, what happens if it is left no connection or always 0
2. why status s6 is always 0, i got ans that it indicate that 8086 is controlling the bus and tri-state during hold ack ........as s6 is active high signal it should be logic 1 rather than 0 ,
can any one explain that..
2. why status s6 is always 0, i got ans that it indicate that 8086 is controlling the bus and tri-state during hold ack ........as s6 is active high signal it should be logic 1 rather than 0 ,
can any one explain that..