Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

double ridged horn antenna at 2 GHz

Status
Not open for further replies.
A

atsou

Newbie level 6
Newbie level 6
Joined
Jun 10, 2004
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
128
Hello...

I want to construct the above antenna with central frequency at 2 GHz and a bandwidth from 1GHz to 3 GHz..
I have manage to calculate the dimensions for each frequency but I dont Know how to combine all this dimensions to one for the construction?
This might sound funny but if somebody is aware of the above please help me!!!!
Is it going to be done mechanically? For example using a screw? But how? I am confused..please help me.

Thank you in advance.

Best regards,
atsou
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top