Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Does GSM allow capacitor coupling?

Status
Not open for further replies.

dd2001

Full Member level 4
Full Member level 4
Joined
Apr 14, 2002
Messages
236
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
1,912
Hi, everyone

Does GSM transceiver allow to use cap coupling between following stages?

LNA->Mixer_RF->VGA->Mixer_IF->BB_Filter (receiver)

BB_Filter->Mixer_IF->Mixer->RF->pre_PA (Transmitter)


Anyone knows? Or have to be DC coupling for all stages?


Thanks a lot!
 

yeah,because the frequency of VCO radio,and receive from antanne, via mixing with the VCO. produce the DC partion . So we have to add DC coupling capcitor.
 

Yes,you may use cap beteween the BB and IF. :D
 

Hi
What is the advantages of using the coupling cap?
 

The advantage of using a coupling capacitor between circuit stages is that you are not constrained with the dc voltage difference between them but of course it introduce also loses specially in the higher band of frequency.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top