alah
Junior Member level 3
- Joined
- Jun 30, 2011
- Messages
- 25
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Caracas, Venezuela
- Activity points
- 1,437
Raza, so we agree that 120v wouldnt harm the winding being either 110 OR 220 Scott could simply connect it to 120 and measure the output, right.
Although those 3.5 ohms means it will draw some current. He should use a switch and an inline fuse for protection, maybe 20 Amps?
If the fuse doesnt blow and the transformer doesnt hum or vibrate without any load, it should be OK. Or monitor a while to check that it doesnt overheat.
Although those 3.5 ohms means it will draw some current. He should use a switch and an inline fuse for protection, maybe 20 Amps?
If the fuse doesnt blow and the transformer doesnt hum or vibrate without any load, it should be OK. Or monitor a while to check that it doesnt overheat.