Digitial pot design using MAX5160LEUA

Status
Not open for further replies.
C

chethankp

Member level 4
Joined
Jan 4, 2010
Messages
76
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
bangalore
Visit site
Activity points
1,860
Hi ,
I want to have a digital pot so I got a MAX5160LEUA IC , Now I have a some doubt in program the Micro controller for controlling the MAX5160 digital pot .
I have connected a load between H and L pins and trying to send HIGH signal (to UP/Down) pin . but there is no change load current ..

Can you pls help how to send proper signal to the UP/Down pin ..?

 

The load shd not be connected between H and L. Read the application note in manaul
you have to connect in series for a small load and with a opamp for current taking load...

To get a Analog output u can choose a pwm method that was much easy....

the CE must be low and if the u/d is low when a high to low pulse in INC it will increment the position.
if the u/d is high and a high to low pulse in INC it will decrement the position...
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…