Ali Mohaidat
Newbie level 3
- Joined
- Apr 23, 2014
- Messages
- 4
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Location
- Arbela, Irbid, Jordan, Jordan
- Activity points
- 26
hello guys.
I am designing a PCB that contains a digital to analog converter , my question is about the separation between the analog and digital grounds i want you to take a look at my design and tell me what is best to do ,,
i have power supply that provides 3.3 volts , +-12 volts and 5 volts.
i used the 3.3 volts as a digital supply and the others all for the analog parts
i made a connection between the analog and the digital circuits under the dac , please look at the circuit and tell me the best way to separate between them in order to have the best performance .
thank you
I am designing a PCB that contains a digital to analog converter , my question is about the separation between the analog and digital grounds i want you to take a look at my design and tell me what is best to do ,,
i have power supply that provides 3.3 volts , +-12 volts and 5 volts.
i used the 3.3 volts as a digital supply and the others all for the analog parts
i made a connection between the analog and the digital circuits under the dac , please look at the circuit and tell me the best way to separate between them in order to have the best performance .
thank you