ze_dib said:Hi
I 'm studying possibilities to make a digital oscilloscope for PC, with onboard RAM to memorize samples.
I have several questions :
=> Wich bus is the easier to use (hard and driver for linux/windows) : PCI, USB or IEEE1394
=> I though about using many low speed ADC (cheapier) to reach sampling frequency I 'd like to use, is it a good way to do this.
Which FPGA would be the most suitable for that project SpartanII, or APEX20k
TOTO2001
Where?x_eleman said:LCD Graphick display ,18f452 pic project , 1...1000 mhz and frekans meter help..!
Added after 7 minutes:
all codes
asif_warid said:go to fpga4u.com
davorin said:asif_warid said:go to fpga4u.com
Please post correct domain name next time as fpga4u.com/net/org isn't registered at all!!!
Nice project but without source code!oscil said:http://www.mindbend.ro/eoscope/eoscope_en.htm
The Regard.
Who repeated this project?
Your opinions please
CMOS said:Nice project but without source code!oscil said:h**p://www.mindbend.ro/eoscope/eoscope_en.htm
The Regard.
Who repeated this project?
Your opinions please
The archive contains the schematics, PCB and the byte-files needed to program the microcontroller and the cpld: eoscope_1.2.zip
nikifena said:Are you sure ?
The archive contains the schematics, PCB and the byte-files needed to program the microcontroller and the cpld: eoscope_1.2.zip
h**p://www.mindbend.ro/eoscope/download/eoscope_1.2.zip
good luck
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?