Digital Communication Project

[Zaib]

We are studying the course of Digital Communication System (3+1) Course.
Now we have to submit the project of lab of this course.
If anyone of you can give me the idea of the project or some helping material then please share that here or just mail to me:
zaib29@gmail.com

Thanx

 

[hamdard]

Yopu may do CDMA or IDMA simulation with some specific channel in MATLAB.

 

[amir_rastegar2003]

a good idea:
Effect of Using Multiple antenna in capacity and diversity in wireless networks.

thanks. (if this idea helped you plz press "helped buttom").

 

[m_llaa]

Hi
I think u r in BS grade, so simulating common digital modulators and demodulators like ASK,M-PSK,M-QAM,M-FSK in AWGN and fading channel with MATLAB or another software is good and useful for u and your friends in futur.

 

[Zaib]

We need a specific project which we can implement in hardware also.
So, We are thinking about it. You must give some idea about it.

 

[zamir]

u can implement "OFDM in matlab"
"implementation of digital phase lock loop ffor carrier recovery"
" implement the QPSKtransmitter and receiver with LMS based channel equilization in matlab"
"transmission of data b/w two PCs using cordless telephone"
ihave mentioned few projects and help can be extending regarding these projects if required
thanks
zamir

 

[Zaib]

Yes these projects are fine & I need some help,, if possible then please extend it here or mail me zaib29@gmail.com

 

[vjfaisal]

Re: Digital Communication Project ,i badly need them

hi
mr zamir thanks for giving information,
i mintrested inthese projects ,if u have any material regarding to these projects please send to me at

djfaisal@gmail.com

its an urgent so please send me the info!!!!

with waiting to ur answer

best regards

 

[khizar88]

sir can u sent me the details..??plz
frndly_khizar@hotmail.com

 

[zamir]

dear khizar what u want to know specifically mention that.
regards zamir

 

[roopabayareddy]

Please do mail me project ideas on digital communication techniques to roopab82@gmail.com......plzzzzzzzzzz.With brief abstract

 

[KHALEDRAHNAMA]

We are studying the course of Digital Communication System (3+1) Course.
Now we have to submit the project of lab of this course.
If anyone of you can give me the idea of the project or some helping material then please share that here or just mail to me:
zaib29@gmail.com

Thanx

Dear sir,
I suggest you study some IEEE communication Protocol such I2C and Implement it with verilog or VHDL. Then try to burn your FPGA to Test it in real world . Practical stuff are more more better than just simulation for a LAB.

Regards,
KHALEDRAHNAMA

 

[moataz fouad]

We are studying the course of Digital Communication System (3+1) Course.
Now we have to submit the project of lab of this course.
If anyone of you can give me the idea of the project or some helping material then please share that here or just mail to me:
zaib29@gmail.com

Thanx

You can implement a 2-way communication system over a power-line network (PLC) using an MCU for source coding and simple modulation & an analog front-end to generate a suitable voltage & current levels.
You can also replace the MCU by a PC for simplicity.
It's a very hot topic and you can find much more application notes about it in the web.

Do not upload files which are already available on the net, put its link instead. www.isplc.org/docsearch/Proceedings/1998/pdf/0450_001.pdf

Check: Power line communication - Wikipedia, the free encyclopedia

Best regards.

 

[roopabayareddy]

what about secure data transfer using frequency hopping?...using vhdl approach?

 

[zoya123]

plz tell me wat to do 4 carrier frequeny?