Differential amplifier problem . . .

Status
Not open for further replies.
B

bilal shareef

Member level 1
Joined
Dec 11, 2010
Messages
36
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,549
I am using a pressure sensor (MPX2053) for my final year project. the output of the sensor is differential. for that i have designed a circuit that takes the difference of both the output of the sensor and gives their difference at the output. the figure below shows the circuit. .... the problem is that the circuit is working fine in simulation but on hardware it is not working.... please help me... circuit is in the link below... i have used 10K resistors


https://www.google.com.pk/imgres?im...H5GN0wXIwYDwCQ&sqi=2&ved=0CEIQ9QEwBQ&dur=1075
 

You really need to use an instrumentation amplifier. The circuit you have posted will load the output of the pressure transducer and has unequal loading on the two inputs.

Keith
 

i have made the instrumentation amplifier but the problem is same .... what to do now ...???

- - - Updated - - -

i have made the instrumentation amplifier but the problem is same .... what to do now ...???

- - - Updated - - -

i have made the instrumentation amplifier but the problem remains there ... what to do now????
 

You need to show your circuit and also explain what 'your problem' actually is.

Keith
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…