Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Reply to thread

Message

Thanks. Yes, as shown. A 50Ω R at one end of the coaxial or at the other end.
In configuration 1 the transmitter 'sees' a 50Ω coaxial in parallel with 50Ω, not exactly 'perfectly matched' , or is it ?
In configuration 2 the coaxial 'sees' the antenna is in parallel with 50Ω, not exactly 'correctly terminated' , or Is it ?
What are the effects of each ?

[QUOTE="Externet, post: 1790167, member: 13892"] Thanks. Yes, as shown. A 50Ω R at one end of the coaxial or at the other end. In configuration 1 the transmitter 'sees' a 50Ω coaxial in [U]parallel[/U] with 50Ω, not exactly 'perfectly matched' , or is it ? In configuration 2 the coaxial 'sees' the antenna is in [U]parallel [/U]with 50Ω, not exactly 'correctly terminated' , or Is it ? What are the effects of each ? [/QUOTE]

Verification

Welcome to EDAboard.com

Reply to thread

Part and Inventory Search

Connect with us

Online statistics

Forum statistics