Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Difference between Vehiclespy and CANalyzer

Status
Not open for further replies.

suryaprakash.th

Newbie level 4
Newbie level 4
Joined
Jan 10, 2012
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,312
what is the difference between canalyzer and vehiclespy tools

basically these two tools we use for automotive industry.
 

Vehicle spy is cheaper than can analyser. Both does the same thing. Can analyser you have to use their dedicated hardware which cost quite a bit. We have four PCMCIA cards from vector but that is obsolete as most PCs don't have PCMCIA slots now. That cost over a grand for each card.
 

Vehicle spy is cheaper than can analyzer. Both does the same thing and both are license based :). I agree with you , but for vehiclespy dedicated valueCAN device or neoVI FIRE, neoVI Blue, neoVI RED, neoVI PRO are required and for CANalyzer , CANCaseXL(which supports CANalyzer) is required .
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top