Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Difference between MAX232 and MAX232A

Status
Not open for further replies.
If you open the datasheet
in page 1

MAX232.png

you will see that MAX232 data rate is up to 120Kbps with 1uF cap and 64Kbps with 0.1uF cap
MAX232A data rate is up to 200Kbps with just 0.1uF cap

Alex
 
  • Like
Reactions: ponnus

    ponnus

    Points: 2
    Helpful Answer Positive Rating
Thanks for the quick reply,
I noticed that, then what is the difference between MAX232 and MAX232C
 

I'll tell you if you promise that you will not ask me to compare another pair :-D

The letter C is the temperature range of the device

Operating Temperature Ranges
MAX2_ _AC_ _, MAX2_ _C_ _ .............................0°C to +70°C
MAX2_ _AE_ _, MAX2_ _E_ _ ..........................-40°C to +85°C
MAX2_ _AM_ _, MAX2_ _M_ _ .......................-55°C to +125°C
Alex
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top