anila.d90
Newbie
Hello,
Have a question on if it is possible to detect/create ATPG patterns for At-Speed faults in the path between 2 flops, 1st flop clocked at 2x and 2nd flop clocked at 1x ?
The path is a valid functional path
My assumption is the following will work, but not sure how to write the capture procedure for this:
Say i want to detect a slow-to-rise fault
SHIFT mode : d1 = 0 ; d2 = x (don't care 0/1) ; Shift_clk (same for both flops)
CAPTURE mode :
@launch : d1 = 1 ; pulse 2x_clk ;
@capture : pulse 1x_clk;
Please advice
Have a question on if it is possible to detect/create ATPG patterns for At-Speed faults in the path between 2 flops, 1st flop clocked at 2x and 2nd flop clocked at 1x ?
The path is a valid functional path
My assumption is the following will work, but not sure how to write the capture procedure for this:
Say i want to detect a slow-to-rise fault
SHIFT mode : d1 = 0 ; d2 = x (don't care 0/1) ; Shift_clk (same for both flops)
CAPTURE mode :
@launch : d1 = 1 ; pulse 2x_clk ;
@capture : pulse 1x_clk;
Please advice