asking
Full Member level 5
- Joined
- Sep 21, 2010
- Messages
- 279
- Helped
- 6
- Reputation
- 12
- Reaction score
- 6
- Trophy points
- 1,298
- Activity points
- 3,377
I have 2 input PWM and i need to use PIC16F877A as PWM detection on CCP1 and CCP2 module. But i have read in the datasheet that it will use the same timer1. So will it affect the pwm detection of another CCP Module while detecting 1st pwm signal ?
Also i need initial startup sample program in c for detecting PWM using CCP1 and CCP2 as i am new for using CCP modules for detecting PWM signal. I have use CCP modules by using mikroc libraries for generating PWM but not for detecting PWM... please help... i searched but i am not getting any useful links..
Please share some idea if you have...
Also i need initial startup sample program in c for detecting PWM using CCP1 and CCP2 as i am new for using CCP modules for detecting PWM signal. I have use CCP modules by using mikroc libraries for generating PWM but not for detecting PWM... please help... i searched but i am not getting any useful links..
Please share some idea if you have...