Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Details of LED current and exact flash rates?

Status
Not open for further replies.

grizedale

Advanced Member level 3
Advanced Member level 3
Joined
Jun 13, 2011
Messages
838
Helped
17
Reputation
34
Reaction score
17
Trophy points
1,298
Activity points
8,804
Hello,

any more details on theis LED lamp.....SD24 by strobe.com?

https://www.youtube.com/watch?v=zq2pqH5irp0



I wish to know the LED current value on steady burn (whether its the same as when flashing), and the flash frequency.....it says "deci-flash" but just how fast is the flash rate of these "deci-flashes"?
 

I believe the video is designed to show off the maximum luminosity of their led array. There's an incentive to overdrive the led's.

They might endure high current at a low duty cycle. It needs to average out to a lower continuous amount, because it is unlikely the led's would be able to survive that amount of current continuously.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top